It is a good idea to resurface your swimming pool to increase its life. There are signs that indicate that the time for swimming pool resurfacing has come. Some of them include the following.
- Stains on the pool surface.
- Pool discoloration.
- Flaking or peeling on or around your pool surface.
- Pool surface cracks.
- The loss of pebbles.
What Actually Is Swiming Pool Resurfacing?
This job is also known as pool refinishing. It is a process involving the removal and eventual replacement of the existing finish of the surface pool layer.
Once it’s done, the fresh sealant does its work to enhance your pool’s functional life.
How To Resurface Your Swimming Pool?
Here’s a complete guide to easily perform swimming pool resurfacing.
Prepare your Pool Area
Start by estimating your budget before starting to refinish your pool. The average cost is around $6 per square foot; you can estimate how much you may have to spend.
Clear the surrounding area.
Get rid of all patio furniture and electronics accessories from the pool to a separate location.
Protect the area around the pool.
You must put tape on a few tarps or put weather-protecting drop cloths down around the outskirts of your pool.
Draining and Stripping the Pool
Next up is draining. Take control of your pool’s central pump system and turn the “drain” or “backwash” on. Resurfacing your swimming pool cannot start until it empties first.
Patchwork or Repair Damages
Your contractor must scan for cracks, crumbles, blisters, or other deterioration in your pool. Such issues mark a more immediate issue that is with your pool’s plumbing or in-ground foundation. The good news is that resurfacing will deal with such imperfections.
Clean the Pool’s Surface
Get rid of huge debris such as twigs and leaves; next, pressure washes the internal area of your pool to remove algae, stains, and deposits (chemical and mineral).
Strip the Existing Materials
Plaster, fiberglass, and composite need sandblasting or getting chiseled to the underlying concrete. This helps to provide a firmer hold for the new material. It would help if you did not go all out at once. Start with one small area for resurfacing your swimming pool at a time.
Dispose-off stripped materials.
Time To Apply The Finish
Plan your swimming pool resurfacing job at the right time. Try to start when the weather conditions are most favorable for the materials you will use. For example, fiberglass, concrete, and epoxy set fast in warm, dry weather.
After application and consequent drying, re-fill your pool!
Select those materials that have a long-lasting finish. The high-end pools look and function impressively after resurfacing with materials such as pebble concrete, ceramic tile, or quartz. All of the materials mentioned above offer durable lining which easily resists algae, stains, and chemical-related damage to your swimming pool.
While getting your swimming pool resurfaced is something you can do on your own, it is not the best route. The fact is that it is a time-consuming and highly labor-intensive job as well.
Other than that, there are a lot of things that can potentially go wrong. Therefore, it is better to leave this to the professionals. They have years of experience to respond to anything which may come your way.